Content
Ultimate Switch
Details
Views
Description
Compatibility -
Nikon N2 Plug type (Nikon D70s / D80 ... )
The Ultimate Switch™ pack contains:
• 1 Plug & Wire, with protected terminals.
• 1 Ultra light blow switch
• 1 Black silicone tube/hose
How it works !
Now you can trigger your consumer or professional Digital Photo Camera shutter with this new hand-free
remote shutter release. Designed for skydive photographers and camera flyers.
The Ultimate Switch™ is ultra-compact and ready-to-use device. 60% less volume then your audible
altimeter (Pro-ditter, Pro-track, Solo and others). You can place it anywhere inside the helmet, it will not
bother you!
The Ultimate Switch™ is compatible with all SLR Photo cameras. You can find your Ultimate Switch™ Kit on
our online store and in the near future at your DZ gear shop! It is designed so you don't have to use or cut
your actual wire or plug, preserving your previous investment.
For example: in the future, if you change your Digital Camera (Canon 450D to Sony Alpha 850), all you have
to do is buy a new Ultimate Switch™ plug and wire for your new camera and you are all set.
The Ultimate Switch™ is a ready-to-use
device. Just a few personal adjustments
for your blow preferences and is ready
to work.
To trigger your camera, you simply
blow lightly into the small silicone hose
(tube) that you route down to your lips.
Short puffs into the hose fire off single
shots while a constant light blowing
pressure will keep continuous shooting.
Technical details
Dimensions
25mm (w) x 25 mm (h) x 9 mm (d)
Weight: All kit 62 grams.
The Ultimate Switch™ skydive blow switch consists of 3 units (parts):
1 Camera plug with wire and terminals
1 Ultra Light Pressure Switch
1 Black silicone tube/hose
With these individual parts, you have a very easy installation and a nice and discreet look on your helmet
setup. The Ultimate Switch™ placement; you can use a double-coated foam tape that adheres and shapes
to a wide variety of surfaces. (example: 3M Scotch® Mounting Tape).
The Ultimate Switch™ may remain installed inside the helmet at all times.
The plug & wire part can be installed anywhere. You don’t need to drill a big hole on your helmet like other
installation kits require. Hole size: a 6/7mm hole is enough to route the cable/terminals into the helmet.
The hose/tube is the easiest part to install :)
